Ara
Toplam kayıt 13, listelenen: 1-10
Construction of Lossless Ladder Networks With Simple Lumped Elements Connected Via Commensurate Transmission Lines
(IEEE-INST Electrical Electronics Engineers Inc, 2009)
In this work an algorithm to design lossless ladder networks with simple lumped elements connected via commensurate transmission lines is proposed. After giving the algorithm a lumped-element low-pass Chebyshev filter was ...
Broadband Matching via Unequal Length Cascaded Transmission Lines
(World Scientific Publ Co Pte Ltd, 2017)
In this paper a new approach based on the real frequency technique (RFT) has been proposed to solve broadband matching problems using cascaded unequal length transmission lines. At the end of the design process optimum ...
Transitional Butterworth-Chebyshev Filters
(IEEE, 2019)
Filters which are studied in this paper have properties that lie between those of the Butterworth and Chebyshev filters. So it is appropriate to call this kind of filters as transitional Butterworth-Chebyshev filters. In ...
Real frequency design of Pi and T matching networks with complex terminations
(Institute of Electrical and Electronics Engineers Inc., 2018)
In this paper real frequency design of Pi and T matching networks with complex terminations is studied. Generally the generator and load termination impedances are given as measurement values. So they can be regarded as a ...
Analysis of Mixed-Element Structures Formed With Shunt Capacitors Separated by Transmission Lines
(IEEE-Inst Electrical Electronics Engineers Inc, 2019)
In this brief, the analysis of mixed-element structures formed with shunt capacitors separated by commensurate transmission lines is performed first time in the literature. First, a low-pass lumped-element ladder network ...
A single matching network design for a double band PIFA antenna via simplified real frequency technique
(2006)
In this paper, matched performance of a double band PIFA antenna is reported. The transducer power gain of the antenna is optimized over the commercialized wireless communication bands of 824-960 MHz and 1710-1990 MHz using ...
Circuit model for given reflectance data constructed with mixed lumped and distributed elements for high speed/high frequency communication systems
(IEEE Computer Society, 2005)
In this paper, a reflectance-based "non linear interpolation method" is presented to model the measured or computed data, obtained from a "passive one-port physical device" using mixed lumped and distributed elements. Mixed ...
Power transfer networks at RF frequencies "New design procedures with implementation roadmap"
(IEEE, 2006)
The purpose of this work is to provide the necessary background to design wide-band power transfer two-ports, or so-called broadband matching networks, at radio frequencies for wireless communication systems. The importance ...
A single matching network design for a dual band PIFA antenna via simplified real frequency technique
(2006)
In this paper, the matched performance of a dual band PIFA antenna is reported. The return loss of the antenna has been optimized over the popular commercial wireless communication bands of 824-960 MHz and 1710-1990 MHz ...
Reflectance data model with mixed lumped and distributed elements for wireless communication systems
(2005)
In this paper, a new method is presented to model the given reflectance data obtained from a "passive one-port physical device", as a lossless two port consists of lumped and distributed elements. Basis of the new method ...