Browsing Elektrik - Elektronik Mühendisliği Bölümü Koleksiyonu by Category "Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı"
Now showing items 21-40 of 126
-
Channel Estimation for Realistic Indoor Optical Wireless Communication in ACO-OFDM Systems
(Springer, 2018)In this paper channel estimation problem in a visible light communication system is considered. The information data is transmitted using asymmetrical clipped optical orthogonal frequency division multiplexing. Channel ... -
Code shift keying impulse modulation for UWB communications
(IEEE-INST Electrical Electronics Engineers Inc, 2008)In this paper the system performance of M-ary code shift keying (MCSK) impulse modulation is studied in detail and compared to M-ary pulse position modulation (MPPM) under single- and multi-user scenarios. For that bounds ... -
Complete density calculations of q-state Potts and clock models: Reentrance of interface densities under symmetry breaking
(Amer Physical Soc, 2020)All local bond-state densities are calculated for q-state Potts and clock models in three spatial dimensions, d = 3. The calculations are done by an exact renormalization group on a hierarchical lattice, including the ... -
Compressive sensing for ultra-wideband channel estimation: on the sparsity assumption of ultra-wideband channels
(Wiley-Blackwell, 2014)Due to the sparse structure of ultra-wideband (UWB) multipath channels there has been a considerable amount of interest in applying the compressive sensing (CS) theory to UWB channel estimation. The main consideration of ... -
Conditional Power and Rate Adaptation for MQAM/OFDM Systems Under CFO With Perfect and Imperfect Channel Estimation Errors
(IEEE-INST Electrical Electronics Engineers Inc, 2015)In this paper a new conditional power and rate adaptation scheme for orthogonal frequency-division multiplexing (OFDM) systems is proposed in the presence of carrier frequency offset (CFO) with perfect and imperfect channel ... -
Construction of Lossless Ladder Networks With Simple Lumped Elements Connected Via Commensurate Transmission Lines
(IEEE-INST Electrical Electronics Engineers Inc, 2009)In this work an algorithm to design lossless ladder networks with simple lumped elements connected via commensurate transmission lines is proposed. After giving the algorithm a lumped-element low-pass Chebyshev filter was ... -
Correlation of Experimental Liquid-Liquid Equilibrium Data for Ternary Systems Using NRTL and GMDH-Type Neural Network
(Amer Chemical Soc, 2017)In this work liquid liquid equilibrium (LLE) data for the ternary systems (water + propionic acid + solvent) were experimentally obtained at atmospheric pressure and 298.2 K. The ternary systems show type-1 behavior of ... -
Correlation of ternary liquid--liquid equilibrium data using neural network-based activity coefficient model
(Springer, 2014)Liquid--liquid equilibrium (LLE) data are important in chemical industry for the design of separation equipments and it is troublesome to determine experimentally. In this paper a new method for correlation of ternary LLE ... -
Design and implementation of a negative feedback oscillator circuit based on a Cellular Neural Network with an Opposite Sign Template
(2010)In this paper explicit amplitude and frequency expressions for a Cellular Neural Network with an Opposite-Sign Template (CNN-OST) under oscillation condition are derived and a novel inductorless oscillator circuit with ... -
Design and performance analysis of a novel trellis coded space-time-frequency OFDM transmission scheme
(Wiley-Blackwell, 2008)In this paper a new transmit diversity technique is proposed for wireless communications over frequency selective fading channels. The proposed technique utilises orthogonal frequency division multiplexing (OFDM) to transform ... -
Design of broadband microwave amplifiers with mixed-elements via reflectance data modeling
(Elsevier GMBH Urban & Fischer Verlag, 2008)A practical method is introduced to design single-stage broadband microwave amplifiers with mixed lumped and distributed elements via modeling the reflectance data obtained from lumped-element input and output matching ... -
Design of broadband single matching networks
(Elsevier GMBH Urban & Fischer Verlag, 2009)In general commercially available software tools are preferred to design broadband matching networks for wireless communication systems. But they need a properly selected matching network topology with good initial element ... -
Design of distributed-element RF filters via reflectance data modeling
(Elsevier GMBH Urban & Fischer Verlag, 2008)A reflectance-based modeling method is presented to obtain the distributed-element counterpart of a lumped-element network which is described by measured or computed reflectance data at a set of frequencies. Numerical ... -
Design of Phase Shifters with Ladder Stubs Via Real Frequency Technique
(World Scientific, 2020)Generally at high frequencies, lumped-elements are not preferred because of their limited range of values. Therefore, in this work, a kind of phase shifter formed with ladder stubs is studied and a new approach to design ... -
Design of practical broadband matching networks with commensurate transmission lines
(Elsevier GMBH Urban & Fischer Verlag, 2013)To design broadband matching networks for microwave communication systems commercially available computer aided design (CAD) tools are always preferred. But these tools need proper matching network topology and element ... -
Design of Practical Broadband Matching Networks With Lumped Elements
(IEEE-INST Electrical Electronics Engineers Inc, 2013)It is always preferable to use commercially available software tools to design broadband matching networks for microwave communication systems. However for these tools the matching network topology and element values must ... -
Design of Practical Broadband Matching Networks With Mixed Lumped and Distributed Elements
(IEEE-INST Electrical Electronics Engineers Inc, 2014)Computer-aided design (CAD) tools are always preferred for designing broadband matching networks. However these tools give excellent results when the suitable matching network topology and initial element values are provided. ... -
Design of practical matching networks with lumped elements via modeling
(IEEE, 2007)It is a common practice to utilize commercially available software tools to design matching networks for wireless communication systems. Most of these tools require a properly selected matching network topology with good ... -
Detection of interdependent primary systems using wideband cognitive radios
(Elsevier GMBH Urban & Fischer Verlag, 2013)Cognitive radios (CRs) may be sharing multiple frequency bands with primary systems if the CR is a wideband or an ultra wideband (UWB) system. In that case the CR should ensure all the coexisting primary systems in these ... -
Devil's staircase continuum in the chiral clock spin glass with competing ferromagnetic-antiferromagnetic and left-right chiral interactions
(Amer Physical Soc., 2017)The chiral clock spin-glass model with q = 5 states with both competing ferromagnetic-antiferromagnetic and left-right chiral frustrations is studied in d = 3 spatial dimensions by renormalization-group theory. The global ...