Search
Now showing items 1-10 of 60
Design of Practical Broadband Matching Networks With Mixed Lumped and Distributed Elements
(IEEE-INST Electrical Electronics Engineers Inc, 2014)
Computer-aided design (CAD) tools are always preferred for designing broadband matching networks. However these tools give excellent results when the suitable matching network topology and initial element values are provided. ...
High-pass/low-pass section design for 0 degrees-360 degrees lumped-element phase shifters via the real frequency technique
(TUBITAK Scientific & Technical Research Council Turkey, 2017)
In this paper an algorithm based on the real frequency technique (RFT) is proposed to design high-pass and low-pass sections of a 0 degrees-360 degrees wide range lumped-element phase shifter. The switching process however ...
An Alternative Approach To Design Lumped Element Delay Equalizers
(Istanbul Univ Fac Engineering, 2015)
In this paper an algorithm has been proposed to design lumped element delay equalizers which is considered as a single block as opposed to the existing methods in literature. Then after obtaining the desired delay performance ...
Alternative Transducer Power Gain Expression in Broadband Matching Network Designs
(IEEE, 2016)
In this paper a reflection coefficient based transducer power gain expression has been derived which is an alternative to the impedance based expression exists in the literature. A broadband double matching problem is ...
Broadband Microwave Amplifier Design with Lumped Elements
(Walter De Gruyter Gmbh, 2016)
This study introduces a broadband microwave amplifier design that utilizes the measured scattering parameters of active devices without assuming an initial topology for the matching networks or an analytic form of the ...
Design of practical broadband matching networks with commensurate transmission lines
(Elsevier GMBH Urban & Fischer Verlag, 2013)
To design broadband matching networks for microwave communication systems commercially available computer aided design (CAD) tools are always preferred. But these tools need proper matching network topology and element ...
Design of Practical Broadband Matching Networks With Lumped Elements
(IEEE-INST Electrical Electronics Engineers Inc, 2013)
It is always preferable to use commercially available software tools to design broadband matching networks for microwave communication systems. However for these tools the matching network topology and element values must ...
Relativistic antihydrogen production by pair production with positron capture
(Elsevier Science Bv, 2012)
Antihydrogen atoms may rarely be produced by the collision of antiprotons with ions. At relativistic velocities the antiproton may pass around the Coulomb field of the nucleus and the electron-positron pairs can be produced ...
Broadband impedance matching via lossless unsymmetrical lattice networks
(Elsevier GMBH Urban & Fischer Verlag, 2012)
In this paper a broadband impedance matching network (equalizer) design algorithm has been proposed. In the equalizer a lossless unsymmetrical lattice network has been utilized. The branch impedances of the lattice network ...
Shifted-modified Chebyshev filters
(TUBITAK Scientific & Technical Research Council Turkey, 2013)
This paper introduces a new type of filter approximation method that utilizes shifted-modified Chebyshev filters. Construction of the new filters involves the use of shifted-modified Chebyshev polynomials that are formed ...
