Browsing Mühendislik ve Doğa Bilimleri Fakültesi by Issue Date
Now showing items 41-60 of 750
-
Support vector machines based target tracking techniques [Destek vektör makineleri tabanlı hedef takip yöntemleri]
(2006)This paper addresses the problem of aplying powerful statistical pattern classification algorithms based on kernels to target tracking. Rather than directly adapting a recognizer we develop a localizer directly using the ... -
Liquid-liquid equilibria of water+propionic acid+solvent ternaries at 298.2 K
(2006)(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + solvent) were measured at T= 298.2 K and atmospheric pressure. The solvents were methyl isoamyl ketone (5-methyl-2-hexanone) and diisobutyl ketone. The ... -
UNIFAC application to water-1-propanol-n-amyl alcohol and n-amyl acetate ternaries
(2006)Liquid-liquid equilibrium (LLE) data for water-1-propanol-n-amyl alcohol and water-1-propanol-n-amyl acetate ternaries were measured at T=298.2 K. The UNIFAC model was used to correlate the experimental data. A comparison ... -
The effects of higher-order approximations in a fluid-filled elastic tube with stenosis
(Verlag der Zeitschrift fur Naturforschung, 2006)Treating arteries as thin-walled prestressed elastic tubes with a narrowing (stenosis) and blood as an inviscid fluid we study the propagation of weakly nonlinear waves in such a fluid-filled elastic tube by employing the ... -
Near field parameter estimation of moving sources with recursive expectation maximization algorithm [Yinelemeli beklenti/en büyükleme algoritması ile hareketli kaynakların yakın-alan parametrelerinin kestirimi]
(2006)In this paper maximum likelihood (ML) estimator is proposed for the joint estimation of the direction of arrival (DOA) and range parameters of moving sources in the near-field of the antenna array. ML estimation algorithm ... -
On sectional curvatures of a Weyl manifold
(2006)In this paper it is proved that if at each point of a Weyl manifold the sectional curvature is independent of the plane chosen then the Weyl manifold is locally conformal to an Einstein manifold and that the scalar curvature ... -
Power transfer networks at RF frequencies "New design procedures with implementation roadmap"
(IEEE, 2006)The purpose of this work is to provide the necessary background to design wide-band power transfer two-ports, or so-called broadband matching networks, at radio frequencies for wireless communication systems. The importance ... -
Optical and structural properties of Ta2O5-CeO2 thin films
(Elsevier Science Bv, 2007)In this study the sol-gel spin-coating method has been used to make Ta2O5-CeO2 thin films. These films have been prepared in various composition ratios to observe changes in their optical and structural properties. Reflectance ... -
Influence of pH on the optical and structural properties of spin coated CeO2-TiO2 thin films prepared by sol-gel process
(Elsevier Science Bv, 2007)Optical and structural properties of mixed CeO2-TiO2 thin films have been investigated by varying the pH of the coating sol. The films were prepared by sol-gel process using spin-coating technique with a spin speed of 2500 ... -
MEDI 333-Histone deacetylase inhibition activity of resveratrol and its analogs
(Amer Chemical Soc, 2007)[Abstract Not Available] -
Space-time coded systems with joint transmit and receive antenna selection
(IEEE, 2007)This paper studies performance of space-time coded (STC) systems with joint transmit and receive antenna selection over multiple input multiple output (MIMO) flat and frequency-selective (FS) fading channels. Specifically ... -
Iterative channel estimation techniques for uplink MC-CDMA systems
(IEEE, 2007)In this work maximum likelihood (ML) channel estimation for uplink multicarrier code-division multiple-access (MC-CDMA) systems is considered in the presence of frequency fading channel. The expectation-maximization (EM)- ... -
Distributed estimation with channel estimation error over orthogonal fading channels
(IEEE, 2007)We study distributed estimation of a source corrupted by an additive Gaussian noise and observed by sensors which are connected to a fusion center with unknown orthogonal (parallel) flat Rayleigh fading channels. The fading ... -
Channel estimation for MIMO-OFDM systems in fixed broadband wireless applications
(IEEE, 2007)Systems employing multiple transmit and receive antennas known as multiple input multiple output (MIMO) systems can be used with OFDM to improve the resistance to channel impairments. Thus the technologies of OFDM and MIMO ... -
An efficient joint data detection and channel estimation technique for uplink MC-CDMA systems based on SAGE algorithm
(IEEE, 2007)This paper is concerned with joint channel estimation and data detection for uplink multicarrier code-division multiple-access (MC-CDMA) systems in the presence of frequency fading channel. The detection and estimation ... -
EM-Based MAP channel estimation and data detection for downlink MCC-CDMA systems
(IEEE, 2007)In this work we propose a joint MAP channel estimation and data detection technique based on the Expectation Maximization (EM) method with paralel interference cancelation(PIC) for downlink multi-carrier (MC) code division ... -
EM-based joint data detection and channel estimation for uplink MC-CDMA systems over frequency selective channels
(IEEE, 2007)This paper is concerned with joint channel estimation and data detection for uplink multicarrier code-division multiple-access (MC-CDMA) systems in the presence of frequency fading channel. The detection and estimation ... -
Effect of channel estimation errors on the performance of space time coded systems with antenna selection
(IEEE, 2007)This paper presents the effects of channel estimation errors on the performance especially diversity gain of space-time coded systems with antenna selection. We consider maximum signal to noise ratio as the antenna selection ... -
An intelligent approach to ERP software selection through fuzzy ANP
(Taylor & Francis, 2007)During the implementations of enterprise resource planning (ERP) systems most companies have experienced some problems one of which is how to determine the best ERP software satisfying their needs and expectations. Because ... -
A hybrid approach to machine-tool selection through AHP and simulation
(Taylor & Francis, 2007)The selection process of a machine tool has been a critical issue for companies for years because the improper selection of a machine tool might cause many problems having a negative effect on productivity precision ...