Browsing Mühendislik ve Doğa Bilimleri Fakültesi by Subject "Real frequency technique"
Now showing items 1-7 of 7
-
An Alternative Approach To Design Lumped Element Delay Equalizers
(Istanbul Univ Fac Engineering, 2015)In this paper an algorithm has been proposed to design lumped element delay equalizers which is considered as a single block as opposed to the existing methods in literature. Then after obtaining the desired delay performance ... -
Broadband Matching via Reflection Coefficient Modeling
(AVES YAYINCILIK, 2016)[Abstract Not Available] -
Broadband Matching via Unequal Length Cascaded Transmission Lines
(World Scientific Publ Co Pte Ltd, 2017)In this paper a new approach based on the real frequency technique (RFT) has been proposed to solve broadband matching problems using cascaded unequal length transmission lines. At the end of the design process optimum ... -
Design of broadband single matching networks
(Elsevier GMBH Urban & Fischer Verlag, 2009)In general commercially available software tools are preferred to design broadband matching networks for wireless communication systems. But they need a properly selected matching network topology with good initial element ... -
Design of impedance matching network for B&K 8104 hydrophone via Direct Computational Technique for underwater communication
(2010)Underwater acoustic communication is a rapidly growing field of applied research and is a technique of sending and receiving message below water. There are several ways of doing such communication but the most common one ... -
High-pass/low-pass section design for 0 degrees-360 degrees lumped-element phase shifters via the real frequency technique
(TUBITAK Scientific & Technical Research Council Turkey, 2017)In this paper an algorithm based on the real frequency technique (RFT) is proposed to design high-pass and low-pass sections of a 0 degrees-360 degrees wide range lumped-element phase shifter. The switching process however ... -
Modeling based real frequency technique
(Elsevier GMBH Urban & Fischer Verlag, 2008)Usually commercially available software tools are used to design matching networks for wireless communication systems. But a properly selected matching network topology with good initial element values must be supplied to ...