Real frequency design of Pi and T matching networks with complex terminations
Abstract
In this paper real frequency design of Pi and T matching networks with complex terminations is studied. Generally the generator and load termination impedances are given as measurement values. So they can be regarded as a resistor and a reactive element connected in series. To be able to design a Pi network this series impedance models must be transformed to parallel models. But for T network designs the assumed series models can be utilized there is no need a transformation process. Then Pi or T matching networks can be designed via Q based method which is well defined in the literature. © 2017 EMO (Turkish Chamber of Electrical Enginners). Bu tezde, karmaşık sonlandırma L, Pi ve T tipi uyumlaştırma devrelerinin gerçek frekanslı tasarımı analiz edilmiştir. Önerilen yaklaşımın temel amacı, mevcut olan yöntemlerin, karmaşık sonlandırma dar bantlı empedans uyumlaştırma devrelerinin tasarımı üzerine önerilen metoda göre karşılaştırılmasıdır. İki tip model vardır: T tipi devre tasarımı için seri model ve Pi ve L tipi devre tasarımı için paralel model. Kaynak ve yük sonlandırma empedansları ölçüm değerleri olarak verilir, böylece, seri olarak bağlanmış bir direnç ve reaktif eleman olarak kabul edilebilirler. Bir Pi tipi devre tasarlayabilmek için bu seri empedans modelleri paralel modellere dönüştürülmelidir. Fakat T tipi devre tasarımları için, varsayılan seri modelleri kullanılabilir, bir dönüşüm sürecine gerek yoktur. Daha sonra, ilgili devre Pi veya T tipi, literatürde iyi tanımlanmış kalite faktörüne (Q) dayalı bir yöntemle tasarlanabilir. Önerilen yaklaşım, dar bantlı empedans uyumlaştırma devrelerini tasarlamak için yeni bir yöntemdir. Bu yeni yöntemin amacı, devre elemanların değerleri olan sonlandırma modellerine gerek duymadan, tüm L, Pi ve T tipleri için dar bantlı empedans uyumlaştırma devrelerini yapılandırmaktır. Mevcut yöntemlerle karşılaştırmak için, karmaşık sonlandırma kısmı ve Q tabanlı yöntem denklemleri türetilmiştir ve yeni yöntem için yeni bir Q-tabanlı yöntem (değiştirilmiş) geliştirilmiştir. Bu tez çalışmasında, önerilen yaklaşımlar L tipi, Pi tipi ve T tipi olarak farklı örneklerle açıklanmıştır.
Source
10th International Conference on Electrical and Electronics Engineering (ELECO)Volume
2018-JanuaryPages
1328-1331Collections
Keywords
Narrowband networksLossless networks
L type networks
Pi type networks
T type networks
Dar bant devreler
Kayıpsız devreler
L tipi devreler
Pi tipi devreler
T tipi devreler
Share
Related items
Showing items related by title, author, creator and subject.
-
Modified Q-Based Real Frequency Design of Narrowband Impedance Equalizer with Complex Terminations
Authors:Şengül, Metin; Yeşilyurt, Gökmen
Publisher and Date:(World Scientıfic Publ Co Pte Ltd, 2019)In this paper, real frequency design equations of narrowband impedance matching network with complex terminations are derived; which are used to design L, Pi and T type of networks. In the approach, there is no need to have termination models with component values, it is enough to have measurement values of termination impedances. A few examples are solved to exhibit the have measurement values of termination impedances. A few examples are solved to exhibit the merits and application of the derived ...
-
Computation of two-variable mixed element network functions
in this dissertation the algorithm known as “Standard Decomposition Technique (SDT)” is used together with Belevitch’s canonic representation of scattering polynomial for two-port networks operate on high frequency to find the analytical solutions for “Fundamental equation set (FES)”. This FES is extracted by using Belevitch canonic polynomials “ ??(?? ??) ?(?? ??) and ??(?? ??)” used for the description of mixed lumped and distributed lossless two-port cascaded networks in two variables of degree ...
-
Explicit solutions of two-variable scattering equations describing lossless low-pass two-ports with mixed lumped and distributed elements
One of the methods to describe mixed lumped and distributed element two-port networks is to use two-variable scattering equations. In literature, the solutions of these explicit descriptive equations for some classes of low-order ladder networks are derived under some restrictions. In this paper, the complete and explicit solutions of the equations are derived to describe lossless low-pass two-port networks with mixed lumped and distributed elements, up to four elements, without any restrictions.